		IMB-Q770-R10 (SA45) AMI Aptio BIOS 
		*** Remember to update .veb file to each other when changing common module
#############################################################################
Mainboard	: IMB-Q770-R10 (SA45)
Chipset(SA45)	: Q77+PCH+F81866+F81216AD+I82583L+I82579 (AMT 8.0)+ALC662
=============================================================================
WDT:	Int 15h				(F81866)
	ax = 6F02h
	bl = value.
	bl = 0	(Stop counter)
DIO:	Int15				()
	Input	ax=6F08h
	IoBase : 280h  bit 0-3    ->  al(bit 0-3)
	         281h  bit 0-7	  ->  cl(bit 0-7)
	output	ax=6F09h
	IoBase : 280h  bit 4-7    ->  bl(bit 0-3) = value
	         282h  bit 0-7    ->  cl(bit 0-7) = value
=============================================================================
CPU Microcode : 
M12206A7       M12306A4       M12306A6       M12306A2
M12306A8       M12306A9

=============================================================================
Note:
1. Support ERP function. When ERP function enabled, only PWRBTN can power-up
   system from S4/S5.
2. Ivy Bridge not support DDR3L.
3. PS/2 KB/MS support S1/S3 wake only.
=============================================================================
-----------------------------------------------------------------------------
Version		: SA45AR13.BIN
Date		: 2012/11/2
CheckSum	: 152Fh	
Sign-on Message	: N/A
Known Issues:
1.SATA Mode [IDE] can not istall Fedora14
-----------------------------------------------------------------------------
Action		:
1.Update TPM module FW version and rework to clear TPM function ok
2.Fixed USB3.0 Port can wake from S4 and ˫KB can wake S5 after installing xHCI Driver
3.Add item to choose Memory Frequency for customer ,because some memory will cause 5beeps when boot on.
4.Fixed USB eModule Bad code cause PS2 KB reboot failed.
*****************************************************************************
-----------------------------------------------------------------------------
Version		: SA45AR12.BIN
Date		: 2012/09/10
CheckSum	: 551Dh	
Sign-on Message	: N/A
Known Issues:
1.SATA Mode [IDE] can not istall Fedora14
2.USB3.0 Port can wake up from S4 after installing USB3.0 Driver
3.TPM Clear failed
-----------------------------------------------------------------------------
Action		:
1.Fixed OP(˫)-KB easy to have no no function when plug USB Device on USB Port and push key [Delete]/[F7]
2.Fixed Clear CMOS Jumper function failed   
3.Add i82583L Lan OptionRom for Lan boot
*****************************************************************************
-----------------------------------------------------------------------------
Version		: SA45AR11.BIN
Date		: 2012/08/27
CheckSum	: 725Fh	
Sign-on Message	: N/A
Known Issues:
1.SATA Mode [IDE] can not istall Fedora14
2.USB3.0 Port can wake up from S4 after installing USB3.0 Driver
3.TPM Clear failed
-----------------------------------------------------------------------------
Action		:
1.Support USB3.0 Ports to install OS
2.Fixed USB3.0 Ports can wake from power-off after install USB3.0 Driver
3.Support Memory Frequency above 1333Mhz
4.Fixed sometimes wakeup but screen display nothing
5.Fixed COM3~6 IRQ resouce disorder
6.Modify AT/ATX show items name
7.Fixed MEBx resolution can not display full screen
8.Fxied Clear CMOS function failed
9.Modify SMBios/iAMT SOL/PECI/Voltage/DVMT Memory setting
10.Fixed in DOS, COM3~6 console redirection failed but BIOS Menu Setup OK   
*****************************************************************************
-----------------------------------------------------------------------------
Version		: SA45AR10.BIN
Date		: 2012/08/06
CheckSum	: BB9Fh
Sign-on Message	: N/A
BIOS Spec. Ver.	: V1.0
-----------------------------------------------------------------------------

Action		: 1.First Release.
=============================================================================

